Corsigra Build
- steviebuggy
- CB-Uk User
- Posts: 658
- Joined: Fri Jul 12, 2013 10:44 pm
- Location: dogsthorpe, peterborough
Re: 1998 1.0 12v skint build
I'll hopefully get a video of it tomorrowif my cack phone will let me! Its a quiet rumble when its ticking over, then nice and loud when you pull away and then a low rumble when the car settles
- gazza_no7
- CB-Uk User
- Posts: 1532
- Joined: Tue Aug 16, 2011 8:01 am
- Location: Barton Upon Humber
Re: 1998 1.0 12v skint build
Looks good
- steviebuggy
- CB-Uk User
- Posts: 658
- Joined: Fri Jul 12, 2013 10:44 pm
- Location: dogsthorpe, peterborough
Re: 1998 1.0 12v skint build
Does any body know where I can get some second hand alloys for it really really cheap?
- johnny
- Senior Moderator
- Posts: 4875
- Joined: Sun Jul 08, 2012 4:26 am
- Location: Donegal,Ireland
Re: 1998 1.0 12v skint build
Scrappy any 4 stud vaux alloys will fit,
If it doesn't fit,
force it,
If it breaks,
It needed replacing anyway
force it,
If it breaks,
It needed replacing anyway
- steviebuggy
- CB-Uk User
- Posts: 658
- Joined: Fri Jul 12, 2013 10:44 pm
- Location: dogsthorpe, peterborough
Re: 1998 1.0 12v skint build
I'll have to annoy my local scrappers and see what they can come up with the car is neally there its just the wheels that let it down a bit now
- johnny
- Senior Moderator
- Posts: 4875
- Joined: Sun Jul 08, 2012 4:26 am
- Location: Donegal,Ireland
Re: 1998 1.0 12v skint build
Yeah def agree with that lol
Nice set of corsa sxi's would suit yours or the vectra star alloys but there hard to come by in 4 stud
Nice set of corsa sxi's would suit yours or the vectra star alloys but there hard to come by in 4 stud
If it doesn't fit,
force it,
If it breaks,
It needed replacing anyway
force it,
If it breaks,
It needed replacing anyway
- steviebuggy
- CB-Uk User
- Posts: 658
- Joined: Fri Jul 12, 2013 10:44 pm
- Location: dogsthorpe, peterborough
Re: 1998 1.0 12v skint build
Ah I'll have to keep my eyes open mfor the vectra ones, I've only seen them in five bolt but I do have no attention span sometimes tho hahahaha.
- steviebuggy
- CB-Uk User
- Posts: 658
- Joined: Fri Jul 12, 2013 10:44 pm
- Location: dogsthorpe, peterborough
Re: 1998 1.0 12v skint build
I will get some new photoes on tonight of the front of the car, I would have done it last night but I went to a bbq and had a few too many beers
- steviebuggy
- CB-Uk User
- Posts: 658
- Joined: Fri Jul 12, 2013 10:44 pm
- Location: dogsthorpe, peterborough
- steviebuggy
- CB-Uk User
- Posts: 658
- Joined: Fri Jul 12, 2013 10:44 pm
- Location: dogsthorpe, peterborough
- johnny
- Senior Moderator
- Posts: 4875
- Joined: Sun Jul 08, 2012 4:26 am
- Location: Donegal,Ireland
Re: 1998 1.0 12v skint build
Why did you go for black instead of blue? Looks good
Rust at rear wiper looks quite bad :/
Rust at rear wiper looks quite bad :/
If it doesn't fit,
force it,
If it breaks,
It needed replacing anyway
force it,
If it breaks,
It needed replacing anyway
- steviebuggy
- CB-Uk User
- Posts: 658
- Joined: Fri Jul 12, 2013 10:44 pm
- Location: dogsthorpe, peterborough
Re: 1998 1.0 12v skint build
For some reason I liked the look of the older black bumpers then the more up to date blue ones, I'll be off to find a sanding block and some rust off soon poor car hahahahaha
- steviebuggy
- CB-Uk User
- Posts: 658
- Joined: Fri Jul 12, 2013 10:44 pm
- Location: dogsthorpe, peterborough
Re: 1998 1.0 12v skint build
I'm gutted!!! I 4t ill have enough to get some alloys this week it turns out I'll only have enough to get my spoiler
- johnny
- Senior Moderator
- Posts: 4875
- Joined: Sun Jul 08, 2012 4:26 am
- Location: Donegal,Ireland
Re: 1998 1.0 12v skint build
Spoiler will make such a difference to look
Car doesnt look that bad with the silver steelies tbh, think it because of black bumpers tho
Is all the rist just surface or has rot set in? Door looks like rot
Car doesnt look that bad with the silver steelies tbh, think it because of black bumpers tho
Is all the rist just surface or has rot set in? Door looks like rot
If it doesn't fit,
force it,
If it breaks,
It needed replacing anyway
force it,
If it breaks,
It needed replacing anyway
- steviebuggy
- CB-Uk User
- Posts: 658
- Joined: Fri Jul 12, 2013 10:44 pm
- Location: dogsthorpe, peterborough
Re: 1998 1.0 12v skint build
I've had a good old poke and prod on the door, luckily enough it hasn't gone though yet I'll have it sorted by the weekend
It will be nice to get the spoiler done I've waited ages for one
It will be nice to get the spoiler done I've waited ages for one