Temp gauge mind blower

Help and advice section for technical questions on your Corsa.
Please check that your query hasn't already been answered in FAQ and Technical Info section.

Moderator: Octane2097

Post Reply
User avatar
johnny
Senior Moderator
Posts: 4875
Joined: Sun Jul 08, 2012 4:26 am
Location: Donegal,Ireland

Temp gauge mind blower

Post by johnny »

Real puzzle for anyone that wants to chime in

Temp gauge goes past the red every time it's driven but goes to actual running reading will clutch is engaged or in neutral but as soon as it's back in gear and moving it rises straight away

Cts was changed for known working one, earth was checked and wires aren't damaged, stat was also checked at the start before realising it's only a problem when moving

Heater blows hot and cold, with heater on full heat temp gauge stays full and no coolant or oil lose

I'm completely stumped, I think the only thing it could be is the gauge getting a signal from somewhere but can't figure where

I don't care how bizarre any ideas are just as long as there ideas [emoji38]
If it doesn't fit,
force it,
If it breaks,
It needed replacing anyway :thumbs:
User avatar
stanc3w0rks
CB-Uk User
Posts: 3303
Joined: Tue Feb 18, 2014 4:08 pm
Location: mayo, ireland

Re: Temp gauge mind blower

Post by stanc3w0rks »

Is it going past the red when the car is rolling really slowly at low speed and revs? Id try swapping out the clocks.

Sent from my GT-I8200N using Tapatalk
User avatar
johnny
Senior Moderator
Posts: 4875
Joined: Sun Jul 08, 2012 4:26 am
Location: Donegal,Ireland

Re: Temp gauge mind blower

Post by johnny »

If its rolling in gear without the clutch it rises

Never thought on swapping the clocks, will report back if it works
If it doesn't fit,
force it,
If it breaks,
It needed replacing anyway :thumbs:
User avatar
stanc3w0rks
CB-Uk User
Posts: 3303
Joined: Tue Feb 18, 2014 4:08 pm
Location: mayo, ireland

Re: Temp gauge mind blower

Post by stanc3w0rks »

Id guess the traces on the back of the clocks got scratched and are crossing somewhere. Its probably rising with revs or something.

Sent from my GT-I8200N using Tapatalk
User avatar
johnny
Senior Moderator
Posts: 4875
Joined: Sun Jul 08, 2012 4:26 am
Location: Donegal,Ireland

Re: Temp gauge mind blower

Post by johnny »

Clocks were never out though so can't see how they'd have got damaged, will swap them out tomorrow anyway and hopefully it sorts it
If it doesn't fit,
force it,
If it breaks,
It needed replacing anyway :thumbs:
User avatar
stanc3w0rks
CB-Uk User
Posts: 3303
Joined: Tue Feb 18, 2014 4:08 pm
Location: mayo, ireland

Re: Temp gauge mind blower

Post by stanc3w0rks »

Worth a try

Sent from my GT-I8200N using Tapatalk
User avatar
johnny
Senior Moderator
Posts: 4875
Joined: Sun Jul 08, 2012 4:26 am
Location: Donegal,Ireland

Re: Temp gauge mind blower

Post by johnny »

All sorted, swapped the clocks no difference so swapped them back and it's fixed [emoji38]
If it doesn't fit,
force it,
If it breaks,
It needed replacing anyway :thumbs:
User avatar
diggerhole
CB-Uk User
Posts: 412
Joined: Sun Feb 03, 2013 1:46 am

Re: Temp gauge mind blower

Post by diggerhole »

Sounds like a voltage regulator issue. Or the multi block was loose and you were getting cross talk. All that removing and replacing might have clipped the connector block back in properly or knocked the voltage regulator improving the connection. The voltage regulator controls voltage for both fuel and temperature gauges.Image. I would leave it now it's all working. If it's not broken...don't fix it

Sent from my SM-G928F using Tapatalk
User avatar
johnny
Senior Moderator
Posts: 4875
Joined: Sun Jul 08, 2012 4:26 am
Location: Donegal,Ireland

Re: Temp gauge mind blower

Post by johnny »

Fuel gauge wasn't effected but I imagine it was that or somthing similar

I'm not going to dig into anyway [emoji38] if I knew what I did to fix it I'd have a search but being blind luck I'll leave it well alone [emoji38]
If it doesn't fit,
force it,
If it breaks,
It needed replacing anyway :thumbs:
Post Reply