Main beam issue. HELP

[KieranKizzyjones]

Brought some led headlight bulbs, I put them in went to turn lights on and nothing. I then put the bulbs that were in it to start off with and main beam doesn't work, but hight beam dose work.

Tried fuses.
Thanks


Love it...live it

[mbonner02]

Have you bent one of the 3pins and it hasn't plugged in also. You've got to force them plugs down really hard so make sure it's down flat on the bottom all the way round. If one side where the pins are is slightly raised it won't be connected properly


Sent from my iPad using Tapatalk

[KieranKizzyjones]

Tryed that and few other things but still nothing.


Love it...live it

[mbonner02]

Hmm strange that. Have you traced the wires and made sure you haven't accidently pulled one out without realising. Could be at the back or front of the bulbs loom. Or to see if a wires split and shorting out on so,etching so,ewhere


Sent from my iPad using Tapatalk

[KieranKizzyjones]

I know it's a weird one but my bulb were working fine, put the led ones in and nothing then put other ones back in and nothing. Il have a look tomorrow trace the wires down
Thanks


Love it...live it

[Deedee91]

Don't think the headlights have a relay. If you e got a haynes check the wiring diagram.. I can't find mine or I would, but if there is no damage on the fitting I would think it would be a relay or switch had been damaged by the other bulbs that wouldn't work. I would think relay since your high beam is still working? Got a multimeter?

[KieranKizzyjones]

Thanks for your help guys.
I had another look today after work and I feel like a right t**t now.i was looking at the wrong fuse. Plus some of the wiring needed attention.hahah



Love it...live it

[Deedee91]

Done that thousands of times. Had my whole rear fog light assembly (the lot rear light, switch, testing the loom)!in pieces outside my dads unit then he checked the wiring diagram and almost knocked me out

[KieranKizzyjones]

I was so annoyed,so simple.


Love it...live it