Newbie here with gsi

Post a little about yourself & also about your car(s) in here!
User avatar
stanc3w0rks
CB-Uk User
Posts: 3303
Joined: Tue Feb 18, 2014 4:08 pm
Location: mayo, ireland

Re: Newbie here with gsi

Post by stanc3w0rks »

Iv only ever seen 1 or 2 genuine gsi's

Sent from my Ascend G300 using Tapatalk
User avatar
andy w
CB-Uk User
Posts: 4279
Joined: Wed Sep 18, 2013 10:32 am
Location: newcastle-under-lyme

Re: Newbie here with gsi

Post by andy w »

Welcome mate the gsi is becoming rare around the uk these days and the slots are for a rubber splitter and never really seen many red versions only really seen white or blue tbh but it does look a really tidy car mate and some speedlines wud look good on it after lowering it :)
If it ain't green and black send it back :D
User avatar
johnny
Senior Moderator
Posts: 4875
Joined: Sun Jul 08, 2012 4:26 am
Location: Donegal,Ireland

Re: Newbie here with gsi

Post by johnny »

I've seen a fair amount of Gsi's but only a few un-bastardised one's

There is but I'd imagine they'd be near impossible to find in oz since there rare here, irmscher made aprons for the what we call pre 97 bumpers, I don't know when oz got the facelift but you have a pre 97 anyway
If it doesn't fit,
force it,
If it breaks,
It needed replacing anyway :thumbs:
Enforcerkart65
CB-Uk Newbie
Posts: 31
Joined: Tue Apr 29, 2014 7:54 am

Re: Newbie here with gsi

Post by Enforcerkart65 »

Yer idk think it's a genuine gsi rather a sport like Blackie_No1 said. Yer I hate how some people ruin "bastardise" these good cars. I'm kinda think of making my own little lip. Nothing massive. Just to fill in that space then repainting all the black exterior trim pieces flat black


Sent from my iPhone using Tapatalk
Enforcerkart65
CB-Uk Newbie
Posts: 31
Joined: Tue Apr 29, 2014 7:54 am

Re: Newbie here with gsi

Post by Enforcerkart65 »

Sorry I think it's a sport rather than a gsi XD


Sent from my iPhone using Tapatalk
User avatar
stanc3w0rks
CB-Uk User
Posts: 3303
Joined: Tue Feb 18, 2014 4:08 pm
Location: mayo, ireland

Re: Newbie here with gsi

Post by stanc3w0rks »

It should tell you on the logbook?

Sent from my Ascend G300 using Tapatalk
User avatar
johnny
Senior Moderator
Posts: 4875
Joined: Sun Jul 08, 2012 4:26 am
Location: Donegal,Ireland

Re: Newbie here with gsi

Post by johnny »

There's sites online aswell that you can check by entering your vin number
If it doesn't fit,
force it,
If it breaks,
It needed replacing anyway :thumbs:
User avatar
Blackie_No1
CB-Uk User
Posts: 628
Joined: Sat Feb 15, 2014 1:19 pm

Re: Newbie here with gsi

Post by Blackie_No1 »

Yea that's what I was thinking, the sport came with GSi style interior and a choice of two engines, 1.4 16v and a 1.6 16v. It had "standard" looking bodywork compared to the skirted GSi
User avatar
andy w
CB-Uk User
Posts: 4279
Joined: Wed Sep 18, 2013 10:32 am
Location: newcastle-under-lyme

Re: Newbie here with gsi

Post by andy w »

Plus wasn't the gsi a 8v engine and not 16v ?
If it ain't green and black send it back :D
User avatar
johnny
Senior Moderator
Posts: 4875
Joined: Sun Jul 08, 2012 4:26 am
Location: Donegal,Ireland

Re: Newbie here with gsi

Post by johnny »

No Gsi was 16v same engine as the x16xe minus an egr valve pumping out a mighty extra 2 horsies compared to the 1.6 in the sport and tigras


Looking into it Oz didn't get a sport model, they got the 1.4 in a buck load of trims and special editions and the only 1.6 was the Gsi sold from 94 till 00 so while we were getting sports Oz still got the Gsi with bodykit

Some of that info is off the interwebs so might not be 100%
If it doesn't fit,
force it,
If it breaks,
It needed replacing anyway :thumbs:
User avatar
Blackie_No1
CB-Uk User
Posts: 628
Joined: Sat Feb 15, 2014 1:19 pm

Newbie here with gsi

Post by Blackie_No1 »

Perhaps in the very early versions in '93, but most were a GSi 16v as badged on front and rear.

Image
Enforcerkart65
CB-Uk Newbie
Posts: 31
Joined: Tue Apr 29, 2014 7:54 am

Re: Newbie here with gsi

Post by Enforcerkart65 »

Yer ok. Has to be a gsi then :). It's funny cos when I bought it the guy didn't even know it was a gsi he just thought it was a plain old barina so I got it dirt cheap


Sent from my iPhone using Tapatalk
Enforcerkart65
CB-Uk Newbie
Posts: 31
Joined: Tue Apr 29, 2014 7:54 am

Re: Newbie here with gsi

Post by Enforcerkart65 »

Well quite happy today. Pulled the two dents out the back with a gopro suction cup. And bought some satin black paint to repaint the black trim pieces

Image

Image

Just that one crinkle which I'll have to put some panel eating skillz on :)


Sent from my iPhone using Tapatalk
User avatar
Domwhitex
CB-Uk User
Posts: 1901
Joined: Wed Dec 04, 2013 12:05 am

Re: Newbie here with gsi

Post by Domwhitex »

You did a wicked job there buddy!
User avatar
stanc3w0rks
CB-Uk User
Posts: 3303
Joined: Tue Feb 18, 2014 4:08 pm
Location: mayo, ireland

Re: Newbie here with gsi

Post by stanc3w0rks »

Panel eating? Haha i know what you meant but sounds funny. Very good job though lad

Sent from my Ascend G300 using Tapatalk
Post Reply