Silver Corsa B

[JamieTee_]

It's not low enough when it starts to bend your bumper that's when you need to stop haha


Sent from my iPhone using Tapatalk

[gazza_no7]

True! Did it at burgerking the other day and heard a nice cracking noise lol!

[JamieTee_]

Haha, bet that didn't sound healthy


Sent from my iPhone using Tapatalk

[gazza_no7]

Nope, did a little poo in my pants before I had a look aha!

[gazza_no7]

Changed my pollen filter today! Can't believe how bad it was!
Old vs new

[Domwhitex]

Does it make the hot proper hot and cold cold if you get me? Mines poo for the heat

[Barraclough]

Does it make the hot proper hot and cold cold if you get me? Mines poo for the heat

It made a big difference for me. Blows out more powerful to

[gazza_no7]

Not sure as I haven't used the car since changing it but the blowers have a lot more power now!

[stanc3w0rks]

Does it make the hot proper hot and cold cold if you get me? Mines poo for the heat

It does exactly this and makes it alot stronger as said

Sent from my Ascend G300 using Tapatalk

[Domwhitex]

Thats awesome need one myself

[Blackie_No1]

Shouldn't affect heat, just strength of blower if anything and the air should smell a bit cleaner lol

[andy w]

My blowers were good before i did mine which when ya look at my filter kinda shocks ya lol

[stanc3w0rks]

Shouldn't affect heat, just strength of blower if anything and the air should smell a bit cleaner lol

But the strength of it makes the heat more effective.

Sent from my Ascend G300 using Tapatalk

[gazza_no7]

Just sorted my shed out and in a box I found all this!

Must have forgot about it when I moved house... Looking at it, it seems rusty? Any way I can check them over before putting back on the car?

[johnny]

Just copied this from the interweb since I can't be bothered typing it

Shocks

To bench-test a shock absorber, position it in the same direction it's installed in the vehicle, then extend it fully. Next, turn it upside down and fully compress it. Repeat several times. Replace the shock absorber if there's a lag or skip near the midstroke as the shaft changes direction, the shaft seizes at any point in its travel (except at the ends), any noise other than a swish or click is heard when the stroke is reversed rapidly, any leaks are observed or the action remains erratic after purging air.