Hi all.
My first post and already a problem lol
Anyways.
When I start up my Corsa P-Reg 1.4 8v it makes a grinding sound when key is turned and stops after the engine starts.
Can anyone show me with pictures where the starter motor is as im going to try and see if it needs earthing better or worse can see which one it needs to replace with.
Anyone know the part number or version I need if it does need replacing?
Thx ppl
starter motor ginding when starting up.
Moderator: Octane2097
-
- CB-Uk Newbie
- Posts: 3
- Joined: Sun Apr 29, 2007 7:23 am
-
- CB-Uk User
- Posts: 147
- Joined: Wed Apr 11, 2007 5:13 pm
- Location: Eastleigh (Hampshire)
Re: starter motor ginding when starting up.
firstly hello and welcome
it could be that the teeth on the starter motor are on the way out therefore it makes contact and starts the car but it is slippin on the teeth on the flywheel or vice versa, i havent a picture but i was helpin my mate out wit his starter motor on his GSi and im guessin the starter motor will b in the same place, but as u look under the car from the front, at the rear of the engine bay u will see the drive shafts, (you will need a torch to see it properly) but if u look above the drive shafts u will see a large cylindrical object and above this a smaller cylinder, both are to do the starter motor, the larger is the motor itself and the smaller is the soleniod, off the soleniod there should b 4 wires, at the top, 2 wires 1 black 1 redcolour, bottom a single wire brown, and to the right there will b a thin wire which comes from the switch on the back of ur ignition key which is coloured black with a red strip on it.
i hope this helps
it could be that the teeth on the starter motor are on the way out therefore it makes contact and starts the car but it is slippin on the teeth on the flywheel or vice versa, i havent a picture but i was helpin my mate out wit his starter motor on his GSi and im guessin the starter motor will b in the same place, but as u look under the car from the front, at the rear of the engine bay u will see the drive shafts, (you will need a torch to see it properly) but if u look above the drive shafts u will see a large cylindrical object and above this a smaller cylinder, both are to do the starter motor, the larger is the motor itself and the smaller is the soleniod, off the soleniod there should b 4 wires, at the top, 2 wires 1 black 1 redcolour, bottom a single wire brown, and to the right there will b a thin wire which comes from the switch on the back of ur ignition key which is coloured black with a red strip on it.
i hope this helps
Beastly From Eastleigh
http://www.corsagsi.co.uk
http://www.vauxhallcarclub.co.uk
http://www.allvec.co.uk
http://www...co.uk
http://www.corsagsi.co.uk
http://www.vauxhallcarclub.co.uk
http://www.allvec.co.uk
http://www...co.uk
-
- CB-Uk Newbie
- Posts: 3
- Joined: Sun Apr 29, 2007 7:23 am
Re: starter motor ginding when starting up.
Hi,
thanks for the reply.
Which wire is the earth wire and would it help if I made sure all the contacts are not mudded up or something else.
How much would one cost and is it possible to just get a 1.4 8v from Ebay as are they all the same?
thanks for the reply.
Which wire is the earth wire and would it help if I made sure all the contacts are not mudded up or something else.
How much would one cost and is it possible to just get a 1.4 8v from Ebay as are they all the same?
-
- CB-Uk User
- Posts: 231
- Joined: Sun Oct 23, 2005 6:20 pm
Re: starter motor ginding when starting up.
I have a spare one from a 1.2 8v would think its the same. can find out more if your interested, and require one.
-
- CB-Uk Newbie
- Posts: 3
- Joined: Sun Apr 29, 2007 7:23 am
Re: starter motor ginding when starting up.
yes please. Can you find out more as need car for work as well as wife does as only one car.
If its the same then maybe you can find out if I could replace it on the car myself instead of paying high price at garage as not much money.
Also maybe if it is the same we can come to some arrangement for you to send it to me.
If its the same then maybe you can find out if I could replace it on the car myself instead of paying high price at garage as not much money.
Also maybe if it is the same we can come to some arrangement for you to send it to me.
-
- CB-Uk User
- Posts: 147
- Joined: Wed Apr 11, 2007 5:13 pm
- Location: Eastleigh (Hampshire)
Re: starter motor ginding when starting up.
earth is the wire at the bottom the brown 1 sorry for not statin earlier
Beastly From Eastleigh
http://www.corsagsi.co.uk
http://www.vauxhallcarclub.co.uk
http://www.allvec.co.uk
http://www...co.uk
http://www.corsagsi.co.uk
http://www.vauxhallcarclub.co.uk
http://www.allvec.co.uk
http://www...co.uk
- PaulW
- Administrator
- Posts: 1765
- Joined: Tue Oct 19, 2004 10:34 pm
- Location: Winnington/Liverpool
- Contact:
Re: starter motor ginding when starting up.
1.2 and 1.4 8v starters are the same will fit straight on!
All the above comments are deemed an opinion, and in most cases
-
- CB-Uk User
- Posts: 231
- Joined: Sun Oct 23, 2005 6:20 pm
Re: starter motor ginding when starting up.
PM me your location and I’ll work a price for you.
-
- CB-Uk User
- Posts: 56
- Joined: Wed Apr 20, 2005 8:22 pm
- Location: Leicestershire
Re: starter motor ginding when starting up.
That sounds like what i get sometimes, ive been told its the starter motor not disengageing quickly enought. only seems to happen on cold days though.