Old man's gonna go racing
- Dodging
- CB-Uk User
- Posts: 162
- Joined: Sun May 25, 2014 8:35 pm
Re: Old man's gonna go racing
Also had it weighed on a weighbridge today - 860kg
- Dodging
- CB-Uk User
- Posts: 162
- Joined: Sun May 25, 2014 8:35 pm
Re: Old man's gonna go racing
Jeepers. Driving this car gives you a complete sensory overload. You feel everything, and all the ambient noise that you now hear with all the sound deadening being gone... Hectic
- Dodging
- CB-Uk User
- Posts: 162
- Joined: Sun May 25, 2014 8:35 pm
Re: Old man's gonna go racing
Worked out based on the car's weight, maximum power to stay in class C regulation is 62kw... will have to check with Ross if it is viable to tune it to so little power. Worst case I'll tune it for class B [emoji16]
- Dodging
- CB-Uk User
- Posts: 162
- Joined: Sun May 25, 2014 8:35 pm
Re: Old man's gonna go racing
You guys would probably not believe what I'm busy with right now - I'm pulling the engine out.
Got a leak on the rear main seal 
Got a leak on the rear main seal 
- stanc3w0rks
- CB-Uk User
- Posts: 3303
- Joined: Tue Feb 18, 2014 4:08 pm
- Location: mayo, ireland
Re: Old man's gonna go racing
Shame lad it was all going too well haha.
- Dodging
- CB-Uk User
- Posts: 162
- Joined: Sun May 25, 2014 8:35 pm
Re: Old man's gonna go racing
Seal replaced, motor back in. Still need to do the plumbing, wiring and exhaust, then we are good to go tuning sometime this coming week!
- Dodging
- CB-Uk User
- Posts: 162
- Joined: Sun May 25, 2014 8:35 pm
Re: Old man's gonna go racing
Thought that seeing as I'm busy, might as well use the opportunity to put new studs in the head on the exhaust side. Also put the front tow rope in place, anchored by the engine mount. Got a plate so I can make the mounting point for the harness in the centre of the car. Drained the oil that I initially put in the motor so that the proper oil can go in there, and also got a 5l of G12 anti-freeze.
Will carry on with it again tonight - should be able to have it ready for tuning by around Wednesday.
If all goes well I might be able to take it to the track this weekend
Will carry on with it again tonight - should be able to have it ready for tuning by around Wednesday.
If all goes well I might be able to take it to the track this weekend
- Dodging
- CB-Uk User
- Posts: 162
- Joined: Sun May 25, 2014 8:35 pm
Re: Old man's gonna go racing
Boatload to do tonight - going for tuning tomorrow morning
- Dodging
- CB-Uk User
- Posts: 162
- Joined: Sun May 25, 2014 8:35 pm
Re: Old man's gonna go racing
Late night tonight...
But everything's done!
Went and took it for a drive as well. Took it on the highway, ran it through the gears and everything feels good. Still amazed at how much torque it has low down in the rev range. Heard this really annoying squeak somewhere on the backside, found it was one of the exhaust brackets catching on the body - got that sorted. Also inserted the mounting plate for the harnesses just behind the handbrake lever, but the eye-bolt I have is a bit short, so I'll have to get another one for that purpose.
Other than that it's pretty much ready for action.
Still to do:
Eye-bolt for harnesses
Tuning - happening just now-now
Stickers - willl receive the proofs by Thursday
Fit the proper front brakes and adjust the rear brakes - will do that before the weekend
Make doorcards as the regs state we must have 'em - next week's worry
I think I'm gonna take it to Z on Sunday...
But everything's done!
Went and took it for a drive as well. Took it on the highway, ran it through the gears and everything feels good. Still amazed at how much torque it has low down in the rev range. Heard this really annoying squeak somewhere on the backside, found it was one of the exhaust brackets catching on the body - got that sorted. Also inserted the mounting plate for the harnesses just behind the handbrake lever, but the eye-bolt I have is a bit short, so I'll have to get another one for that purpose.
Other than that it's pretty much ready for action.
Still to do:
Eye-bolt for harnesses
Tuning - happening just now-now
Stickers - willl receive the proofs by Thursday
Fit the proper front brakes and adjust the rear brakes - will do that before the weekend
Make doorcards as the regs state we must have 'em - next week's worry
I think I'm gonna take it to Z on Sunday...
- Dodging
- CB-Uk User
- Posts: 162
- Joined: Sun May 25, 2014 8:35 pm
Re: Old man's gonna go racing
Car being tuned as I type this... Really excited
- Dodging
- CB-Uk User
- Posts: 162
- Joined: Sun May 25, 2014 8:35 pm
Re: Old man's gonna go racing
Really odd - feels like I'm sitting in the waiting room at a hospital while a procedure is being done on a family member haha
- Dodging
- CB-Uk User
- Posts: 162
- Joined: Sun May 25, 2014 8:35 pm
Re: Old man's gonna go racing
Alrighty - tuning is done
Seems my idea of sticking to the Corsa's std intake and airbox worked perfectly to restrict the power to where I want it. Car feels really smooth, good power delivery and lots of early torque. Really happy with the results
So Sunday it is then :twisted:
Seems my idea of sticking to the Corsa's std intake and airbox worked perfectly to restrict the power to where I want it. Car feels really smooth, good power delivery and lots of early torque. Really happy with the results
So Sunday it is then :twisted:
- Dodging
- CB-Uk User
- Posts: 162
- Joined: Sun May 25, 2014 8:35 pm
Re: Old man's gonna go racing
Forgot to add that the torque reading on Ross' dyno works a bit differently - it's a calculated flywheel torque. His dyno also reads higher than Braam's, so I'm hoping I'll be close to the power and torque limits for class C
- Dodging
- CB-Uk User
- Posts: 162
- Joined: Sun May 25, 2014 8:35 pm
Re: Old man's gonna go racing
I think I'll go put the proper brakes on when I get home now-now... Might as well put the semi-slicks on too...
Small job 
Small job 
- Dodging
- CB-Uk User
- Posts: 162
- Joined: Sun May 25, 2014 8:35 pm
Re: Old man's gonna go racing
Brakes are done, semi-slicks on
Got all these stickers lying around, so I thought I'd put them to use lol
Got all these stickers lying around, so I thought I'd put them to use lol