Atlantis Blue 1.0L
- JamesT0708
- CB-Uk User
- Posts: 558
- Joined: Sun Mar 16, 2014 5:52 am
Re: Atlantis Blue 1.0L
Impact wrench should come tomorrow so fingers crossed these last two sh**ty bolts come off and then hopefully she'll be all lowered by tomorrow night
- gazza_no7
- CB-Uk User
- Posts: 1532
- Joined: Tue Aug 16, 2011 8:01 am
- Location: Barton Upon Humber
Re: Atlantis Blue 1.0L
Which bolts are stuck mate?
Sent from my XT1032 using Tapatalk
Sent from my XT1032 using Tapatalk
- JamesT0708
- CB-Uk User
- Posts: 558
- Joined: Sun Mar 16, 2014 5:52 am
Re: Atlantis Blue 1.0L
Got two wheel locking nuts stuck on the rear wheels because I rounded the key haha. Used my mates 400nm impact wrench and they still wouldn't budge, so hoping a more powerful one will do the trickgazza_no7 wrote:Which bolts are stuck mate?
Sent from my XT1032 using Tapatalk
- JamesT0708
- CB-Uk User
- Posts: 558
- Joined: Sun Mar 16, 2014 5:52 am
Re: Atlantis Blue 1.0L
FINALLY GOT THE BOLTS OFF! Had to drop in to Halfords to get a Wheel Locking Nut Remover, just like a socket which is threaded backwards. It took the absolute p**s to do because it didn't fit, but did it thanks to the impact wrench. The hard part is getting the bolt back off the remover because it threads so tightly. Should be low again tomorrow
Sent from my GT-I9505 using Tapatalk
Sent from my GT-I9505 using Tapatalk
- stanc3w0rks
- CB-Uk User
- Posts: 3303
- Joined: Tue Feb 18, 2014 4:08 pm
- Location: mayo, ireland
Re: Atlantis Blue 1.0L
Well done!
Sent from my Ascend G300 using Tapatalk
Sent from my Ascend G300 using Tapatalk
- andy w
- CB-Uk User
- Posts: 4279
- Joined: Wed Sep 18, 2013 10:32 am
- Location: newcastle-under-lyme
- JamesT0708
- CB-Uk User
- Posts: 558
- Joined: Sun Mar 16, 2014 5:52 am
Re: Atlantis Blue 1.0L
Thanks guys. Who would have thought the hardest thing about modding my car to date would be taking a wheel bolt off haha
- JamesT0708
- CB-Uk User
- Posts: 558
- Joined: Sun Mar 16, 2014 5:52 am
Re: Atlantis Blue 1.0L
So she's finally on the deck again! Only took me a couple of hours and managed to finish before it started pi**ing it down. Sorry for the poor pictures, i'll get some more asap;
If anyone's curious that's a 60mm drop all round on 15's. I know the front are Apex 60mm because you can see the writing, but it's rubbed off on the back so I assume it's 60mm too, I could be wrong.
If anyone's curious that's a 60mm drop all round on 15's. I know the front are Apex 60mm because you can see the writing, but it's rubbed off on the back so I assume it's 60mm too, I could be wrong.
- JamieTee_
- CB-Uk User
- Posts: 1850
- Joined: Wed Feb 26, 2014 6:03 pm
- Location: Manchester
- Contact:
Re: Atlantis Blue 1.0L
what you mean we can see the writing?
Sent from my fingers on my screen
Sent from my fingers on my screen
Using Tapatalk
- JamesT0708
- CB-Uk User
- Posts: 558
- Joined: Sun Mar 16, 2014 5:52 am
Re: Atlantis Blue 1.0L
It says Apex60 on the front springs, but the paints come off the backs so there's no writing. I don't mean you can actually see it in the photo, but I could when I put the springs on hahaJamieTee_ wrote:what you mean we can see the writing?
Sent from my fingers on my screen
Sent from my GT-I9505 using Tapatalk
- JamieTee_
- CB-Uk User
- Posts: 1850
- Joined: Wed Feb 26, 2014 6:03 pm
- Location: Manchester
- Contact:
Re: Atlantis Blue 1.0L
Oh I get you now haha, confused me a bit reading it
Sent from my fingers on my screen
Sent from my fingers on my screen
Using Tapatalk
- andy w
- CB-Uk User
- Posts: 4279
- Joined: Wed Sep 18, 2013 10:32 am
- Location: newcastle-under-lyme
- JamesT0708
- CB-Uk User
- Posts: 558
- Joined: Sun Mar 16, 2014 5:52 am
Re: Atlantis Blue 1.0L
Haha, it confused me thinking about your confusion haha. Doesn't even feel like it needs to be tracked which is a bonus, but i'll go anyway just for my tyres sakeJamieTee_ wrote:Oh I get you now haha, confused me a bit reading it
Sent from my fingers on my screen
Sent from my GT-I9505 using Tapatalk
- JamesT0708
- CB-Uk User
- Posts: 558
- Joined: Sun Mar 16, 2014 5:52 am
Re: Atlantis Blue 1.0L
A few better pictures, back to how she should be;
- gazza_no7
- CB-Uk User
- Posts: 1532
- Joined: Tue Aug 16, 2011 8:01 am
- Location: Barton Upon Humber
Re: Atlantis Blue 1.0L
Looks good! Still needs more lows!!
Sent from my XT1032 using Tapatalk
Sent from my XT1032 using Tapatalk