Multiple projects by Johnny

[johnny]

Yeah hopefully anyway

[johnny]

Who can see what shouldn't be under my cam cover [emoji38]

I doubt it's caused any of the ticking though

[stanc3w0rks]

What is it? I dont have much experiance inside engines [emoji14]

Sent from my GT-I8200N using Tapatalk

[johnny]

There's an o ring stuck to the inlet cam for chamber 3 [emoji38] it came from the cam cover bolts but there's 2 more missing and I think they good be blocking a gallery slightly causing pressure issue and ticking

[stanc3w0rks]

Oh yeah I completley missed that haha.. looked at the pic for a good 3-4 mins too haha.

Sent from my GT-I8200N using Tapatalk

[johnny]

I just don't know if I now assume it fell off just when I took the cam cover off and the other 2 where fell at some other time or all 3 were in the head and start stripping to find the other 2

[stanc3w0rks]

Start stripping just to be sure imo [emoji14] I think your right about that one falling off as your took the cover off.

Sent from my GT-I8200N using Tapatalk

[johnny]

Found another o ring in the head, seems the o rings where the problem must have been blocking the oil slightly, I'm not convinced though think it was more blind luck that the ticking hasn't come back yet

[stanc3w0rks]

Hopefully its sorted now.

Sent from my GT-I8200N using Tapatalk

[johnny]

yayy ecu stopped sending a signal to injector no.2 so bridged it with no.4 as a short term fix lasted 2 days before it stopped sending a signal to no.4 aswell [emoji38]

So went and got an ecu chip and immobiliser and all sorted until
somthing is now chewing my cam belt must have fell on the 2 min journey I took without the top belt cover new belt ordered though just need to get a lend of an impact drill for the bottom pulley

[stanc3w0rks]

Two snap on impact guns here at work all the way in Mayo :L

Sent from my GT-I8200N using Tapatalk

[johnny]

Aw I'm getting one tomorrow anyway [emoji38] I keep meaning to buy a gun for bottom pulleys but I always buy something else instead, I have a normal impact drill for normal stuff but it can't handle a bottom pulley

[stanc3w0rks]

Air is the only job if you want power. Even the battery snap on guns we have aren't that strong.

Sent from my GT-I8200N using Tapatalk

[johnny]

Even the air gun won't take off all bottom pulleys, we had a civic in the garage last year I think, and nothing would budge it I've a pic of me hanging off a 4 foot breaker bar and a pic off said bar broken in 2 [emoji38] we got a goliath drill that was for pulleys and another guy grabbed it before I did when the bank closed the garage

[stanc3w0rks]

Yeah thats civics for ya [emoji14] is a goliath drill corded or cordless? Or air?

Sent from my GT-I8200N using Tapatalk