Wiring...

Post anything electrical or ICE here. ie, upgrading your stereo, or removing looms etc.

Moderator: Octane2097

Post Reply
scamp123
CB-Uk Newbie
Posts: 13
Joined: Tue Oct 13, 2015 9:36 pm

Wiring...

Post by scamp123 »

Hey guys, I had stripped out all the plastic trim along the sills of my 3 door Corsa while cleaning it. I found a loom that ends just after the b-pillar, by the base of the rear seats. Does anyone have an idea what it is?
User avatar
johnny
Senior Moderator
Posts: 4875
Joined: Sun Jul 08, 2012 4:26 am
Location: Donegal,Ireland

Re: Wiring...

Post by johnny »

Is it a small loom with a single plug?
If it doesn't fit,
force it,
If it breaks,
It needed replacing anyway :thumbs:
User avatar
stanc3w0rks
CB-Uk User
Posts: 3303
Joined: Tue Feb 18, 2014 4:08 pm
Location: mayo, ireland

Re: Wiring...

Post by stanc3w0rks »

Could it be for heated seats?

Sent from my GT-I8200N using Tapatalk
scamp123
CB-Uk Newbie
Posts: 13
Joined: Tue Oct 13, 2015 9:36 pm

Re: Wiring...

Post by scamp123 »

yeah its a wee three pin single plug.
User avatar
johnny
Senior Moderator
Posts: 4875
Joined: Sun Jul 08, 2012 4:26 am
Location: Donegal,Ireland

Re: Wiring...

Post by johnny »

More than likely heated seats loom
If it doesn't fit,
force it,
If it breaks,
It needed replacing anyway :thumbs:
scamp123
CB-Uk Newbie
Posts: 13
Joined: Tue Oct 13, 2015 9:36 pm

Re: Wiring...

Post by scamp123 »

i dont have the front seat loom though...
User avatar
johnny
Senior Moderator
Posts: 4875
Joined: Sun Jul 08, 2012 4:26 am
Location: Donegal,Ireland

Re: Wiring...

Post by johnny »

What do you mean? That plug would be for the front seats
If it doesn't fit,
force it,
If it breaks,
It needed replacing anyway :thumbs:
scamp123
CB-Uk Newbie
Posts: 13
Joined: Tue Oct 13, 2015 9:36 pm

Re: Wiring...

Post by scamp123 »

i dont have the plugs behind the air recirc trim for the heated seat switches......
User avatar
stanc3w0rks
CB-Uk User
Posts: 3303
Joined: Tue Feb 18, 2014 4:08 pm
Location: mayo, ireland

Re: Wiring...

Post by stanc3w0rks »

I thought all looms were the same for all models?

Sent from my GT-I8200N using Tapatalk
User avatar
johnny
Senior Moderator
Posts: 4875
Joined: Sun Jul 08, 2012 4:26 am
Location: Donegal,Ireland

Re: Wiring...

Post by johnny »

Yeah all looms are the same so the loom for heated seats will be there but not necessarily the plugs in the dash, the wires and maybe plugs will be taped up somewhere
If it doesn't fit,
force it,
If it breaks,
It needed replacing anyway :thumbs:
scamp123
CB-Uk Newbie
Posts: 13
Joined: Tue Oct 13, 2015 9:36 pm

Re: Wiring...

Post by scamp123 »

sweet, didnt know that, gonna have a dig when i take his dash out to put in the new backlighting
User avatar
diggerhole
CB-Uk User
Posts: 412
Joined: Sun Feb 03, 2013 1:46 am

Re: Wiring...

Post by diggerhole »

Two threads... and an almost identical answer...[emoji13]

The wiring for the rear will end in the passenger footwell behind the kick panel. This would be the best place to look for it to start. The Corsa and Combo are effectively 5 looms. Engine, dashboard, rear and 2 door looms . The main 3 all meet up in a big block connector in the footwell. So you may well have the block by the b piller but for cost saving no front wiring. Time to break out the multimeter.

Image

Sent from my SM-G928F using Tapatalk
Post Reply