Fitting a rieger RS front apron

Help and advice section for technical questions on your Corsa.
Please check that your query hasn't already been answered in FAQ and Technical Info section.

Moderator: Octane2097

Post Reply
sach
CB-Uk User
Posts: 757
Joined: Wed Nov 17, 2004 3:35 pm
Location: london

Fitting a rieger RS front apron

Post by sach »

how or whats the best way 2 fit it 2 my std corsa bumper?

sach
User avatar
PaulW
Administrator
Posts: 1765
Joined: Tue Oct 19, 2004 10:34 pm
Location: Winnington/Liverpool
Contact:

Fitting a rieger RS front apron

Post by PaulW »

not 100% sure myself, but will ask around

would say bond it on with something like tigerseal & pos a few self-tapping screws for strength... then smooth it in with some fibreglass & P45 filler, sand it down & smooth it, prime it & then spray...

you\'ll need a plastic primer though as the bumper will flex & also the plastic primer bonds much better to the plastic... normal primers are for metal, so will flake off!
All the above comments are deemed an opinion, and in most cases :spam:
sach
CB-Uk User
Posts: 757
Joined: Wed Nov 17, 2004 3:35 pm
Location: london

Fitting a rieger RS front apron

Post by sach »

ok m8 thanks for that.
Post Reply